Introduction of Spedent® Curvilinear Toothed Timing Belt

Introduction of Spedent® Curvilinear Toothed Timing Belt Featured Image
  • Introduction of Spedent® Curvilinear Toothed Timing Belt

Short Description:

Curvilinear toothed timing belts are similar to traditional synchronous belts, but with teeth that have a curved shape instead of the standard trapezoidal shape. This design allows for a larger contact area between the belt and the pulley, which can result in higher torque transmission and smoother operation. The shape of the teeth is optimized to provide maximum power and efficiency, making curvilinear toothed timing belts ideal for high-performance applications and precision machinery. They are commonly used in industries such as automotive, aerospace, and robotics.

Compared to ordinary trapezoidal toothed synchronous belts, the more scientifically robust structure of the Curvilinear Toothed Timing Belt has resulted in a reasonable improvement in performance.


Product Detail

Product Tags

Applications

Curvilinear Toothed Timing Belt can be applied to various industries, including data storage devices, power tools, postal equipment, food processing, office equipment, centrifuges, currency counters, medical equipment, sewing machines, ticket vending machines, robots, vending machines, and vacuum cleaners, etc.

Advantages

Fiberglass rope provides high strength, excellent flexibility, and high tensile resistance.
Chloroprene rubber protects it from dirt, grease, and moist environments.
The nylon tooth surface enables it to have an exceptionally long service life.
Compared to trapezoidal tooth synchronous belts, it increases the driving power by 30%.
It is maintenance-free and does not require secondary tensioning, reducing the maintenance cost and labor expenses of the drive system.

Recommended Pulley

HTD/STD/RPP Pulley

Remark:

The HTD/STD/RPP series belts are composed of pitch, tooth length, and width.
For example, "HTD 800-8M" represents a belt from the HTD series with a tooth length of 800mm and a pitch of 8mm.
To further explain the terms:
Tooth Length: It refers to the total length measured along the belt's toothline position (represented in millimeters).

Pitch: It refers to the distance between the centers of two adjacent teeth
The corresponding pitch values for the given model numbers are as follows:
HTD 3M =3.00mm      HTD 5M =5.00mm     HTD 8M =8.00mm      HTD 14M =14.00mm    HTD 20M =20.00mm
S3M =3.00mm            S4.5M =4.50mm        S5M =5.00mm            S8M=8.00mm               S14M =14.00mm
RPP 3M =3.00mm      RPP 5M =5.00mm     RPP 8M =8.00mm     RPP 14M =14.00mm
  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories